論文

投稿論文 †

相変態の自己組織化を活用したステンレス・ナノ・ニードルによる細胞への遺伝子導入 †

Naoki Miyano, Keisuke Fujii, Yuuki Inoue, Yuji Teramura,Hiroo Iwata and Hidetoshi Kotera,"Gene transfer device utilizing micron-spiked electrodes produced by the self-organization phenomenon of Fe-alloy", Lab. Chip., 2008, 8, 1104 - 1109
↑掲載雑誌「Lab on a Chip」

合金の拡散型相変態現象における析出相の結晶学関係 †

Temperature Dependence of Austenite Nucleation Behavior from Lath Martensite Nobuo NAKADA, Toshihiro TSUCHIYAMA, Setsuo TAKAKI and Naoki MIYANO ISIJ International, Vol. 51 (2011), No. 2, pp. 299-304NEW!

Naoki Miyano, Akihiro Takahashi, Seigo Kataoka and Kei Ameyama,Reasons for Formation of Twin-Precipitates in Two Phase Stainless Steel, Materials Science Forum Vols. 638-642 (2010) pp 3004-3008.

Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki and Naoki Miyano,Temperature Dependence of Austenite Nucleation Site on Reversion of Lath Martensite,Materials Science Forum Vols. 638-642 (2010) pp 3424-3429

N. Miyano, A.Takahashi, J. Miyazaki and K. Ameyama, Prediction of Precipitate Morphology by Atomic Matchin Model and FEM analysis with Consideration od Anistropy Elastic Strain in a BCC/HCP system, Material Transactions, 19(2008) pp. 471-478

N. Miyano,K. Ameyama, N. Hirano, Y. Takao, FEM analysis based on the 3D-NCS model for precipitate morphology in the BCC/HCP system, Materials Science and Engineering A 480 (2008) 464-471

宮野公樹，則村貴洋，稲葉輝彦，飴山 惠Ti-15V-3Cr-3Sn-3Al合金における三角錐形状α析出相の結晶学的考察日本金属学会誌, 71(2007)　　J. Japan Inst. Metals, Vol. 71, No. 5 (2007), pp. 469-475

Naoki Miyano, Takahiro Norimura2;*, Teruhiko Inaba3 and Kei Ameyama2，Reasons for Formation of Triangular Precipitates in Ti–15V–3Cr–3Sn–3Al Titanium Alloy，Materials Transactions, Vol. 47, No. 2 (2006) pp. 341-347

Naoki Miyano, Kei Ameyama, Noriyoshi Hirano, Yoshihiro Takao，Precipitate　Morphology investigated by the FEM analysis based on the 3D-NCS model in BCC/HCP system, PTM, vol.1（2005）pp. 423-429.

N.Miyano, H. Fujiwara, K. Ameyama, G. C. Weatherly Preferred orientation relationship of intra- and inter-granular precipitates in titanium alloys, Materials Science & Engineering, A333(2002), 85-91.

N.Miyano, K.Ameyama and G.C.Weatherly, HRTEM observation and Atomic Modeling of  interphase boundary in a Ti-22V-4Al alloy, Materials Transactions, 43(2002), 1547-1551.

N. Miyano, H. Fujiwawra, K.Ameyama, G.C.Weatherly,　Prediction od Interface Boundaries in a BCC/HCP System by Three Dimensional Near-Coincidence Site Lattice Modeling,　The Fourth pacific Rim International conference on advanced materials and processing (PRICM4), (2001), 699-702.

宮野公樹，飴山 惠,３次元でのNear-coincidence site lattice解析による２結晶間の結晶学的方位関係と異相界面構造の検討，日本金属学会誌, 64(2000), 42-49.

N. Miyano, K. Ameyama and G. C.Weatherly,　Three dimensional Near-coincidence site lattice modeling of  interface boundary structure in two phase titanium alloy, ISIJ international, 40(2000), S199-S203.

N. Miyano, K. Ameyama and G. C. Weatherly,　Prediction and Observation of interface boundary structure in BCC/HCP alloy system, International conference on Solid-solid phase transformations 99(JIMIC-3), (1999), 589-592.

H. Fujiwawra, T.Maeda, N. Miyano and K.Ameyama,　Morphology and crystallography of triple point nucleated r phase in an () two phase stainless steel,　The third pacific Rim International conference on advanced materials and processing (PRICM3), (1998), 1539-1544.

非平衡PMプロセスと疑似超塑性現象、およびLIGAプロセス関係 †

津守不二夫, 宮野公樹,小寺秀俊,　磁性粒子材料と弾性材料を利用したマイクロアクチュエータの開発（第一報）, J.Jpn.Soc.Powder Powder Metallurgy, 56(2009),127-132.

津守不二夫, 宮野公樹,小寺秀俊,　磁性粒子材料と弾性材料を利用したマイクロアクチュエータの開発（第二報）, J.Jpn.Soc.Powder Powder Metallurgy, 56(2009),133-136.

N. Miyano, Y. Kumagai, M. Yoshimoto, S. Tanaka,K Isonish and K. Ameyama, High Temperature Deformation Behavior and Microstructure Change in Nano Grain Composites, Materials Science Forum Vols. 539-543 (2007) pp. 745-750

宮野公樹・熊谷悠輔・吉本正義・磯西和夫・飴山　惠，ナノ結晶Ti-SiC複合材料の高温変形と組織変化, 日本材料学会誌，Vol.56 No.10 (2007) pp.959-963

Naoki Miyano, Masayoshi Yoshimoto, Yusuke Kumagai, Kazuo Isonishi and Kei Ameyama, Fabrication of a TiC/Ti5Si3 Nano-Garaind Composite for Micro-Parts using Pesudo-Superplastic Deformation by Non-equilibrium PM process, Materials Science Forum Vols. 24-25 (2005) pp. 723-726

NAOKI MIYANO, HIROSHI IWASA, MICHITO MATSUMOTO, KEI AMEYAMA AND SUSUMU SUGIYAMA, Micro-Structures of TiC/Ti5Si3 Composite Produced by Powder Metallurgy and LIGA Process, Microsystems Technologies, 11(2005), 374-378.

Naoki Miyano, Hiroshi Iwasa, Kazuo Isonishi and Kei Ameyama, Fabrication of a TiC/Ti5Si3 Nano-Grained Composite for Micro-Parts by Pseudo-Superplastic Deformation Material. Transactions, vol.45, No.8, (2004), 2552-2557.

NAOKI MIYANO, HIROSHI IWASA, MICHITO MATSUMOTO, KEI AMEYAMA AND SUSUMU SUGIYAMA, Application of APD/PM Process to Produce a TiC/Ti5Si3 Nano Graind Composite, Trans. MRS-J., 29(2004), 3495-3498.

N. Miyano, H. Iwasa, K. Isonishi, S. Tanaka, S. Sugiyama　K. Ameyama，Application of Pseud-superplasticity to Produce TiN/Ti5Si3 and TiC/Ti5Si3 Nano Grain Composites for Micro Molding, Materials Science Forum, vol.447-448(2004), 311-316.

N.Miyano, H. Iwasa, K. Ameyama and S. Sugiyama,　Micro-Structure of TiC/Ti5Si3 Composite Fabricated by LIGA-MA Process, Sensor Symposium, (2003), 387-390.

宮野公樹、多賀谷和範、川瀬和典、飴山　惠、杉山　進,　LIGA-MA-SPS粉末焼結法による微細構造体の製作,日本材料学会誌, Vol.52 No.7 (2003), 783-788.

Naoki Miyano, Kazunori Tagaya, Kazunori Kawase, Kei Ameyama and Susumu Sugiyama, Fabrication of Alloy and Ceramic Microstructures by LIGA-MA-SPS Process, Sensor and Actuator A, 108(2003), 250-257.

N. Miyano, K. Tagaya, K. Kawase, K.Ameyama and S.Sugiyama, Fabrication of Micro Structures Using LIGA-MA-SPS Process, Sensor Symposium, (2002), 321-326.

教育工学関係 †

宮野公樹, 岡本絵莉, 可知直芳, 山本祐輔. 研究とは何かを伝えることをねらいとする理工系学生向けワークショップの開発と実践, 日本科学教育学会論文誌, Vol.34, No.2, 2010年3月NEW!

解説・総説 †

宮野公樹，飴山 惠，「MAによるナノ結晶複合材料の高温変形と組織変化」セラミックス44（2009）No.11 pp.860-864

講座宮野公樹，西村裕太，磯西和夫，飴山 惠，「粉末成形の基礎と素材製造プロセス講座：Ti-SiC非平衡材料の高温変形特性と組織変化」材料, 58（2008）pp.180-185.

宮野公樹，杉山 進，飴山 惠,放電プラズマ焼結法を利用した金属間化合物系材料の製造〜ＭＥＭＳへの応用をねらったマイクロパーツの製作〜材料の科学と工学, vol.40 No. 4 （2003）160-164.

藤原弘、宮野公樹、飴山 惠,チタン合金の組織解説のケーススタディー（2)方位関係の解析と異相界面構造のシュミレーション，金属, 68(1998), 642-647.

藤原弘、宮野公樹、飴山 惠，チタン合金の組織解説のケーススタディー（１）ＨＣＰ相のＫｉｋｕｃｈｉ線解析の方法, 金属, 68(1998), 556-559.

（依頼記事）宮野公樹, 析出現象や界面研究を活かす分野として〜ＭＥＭＳへの応用〜, まてりあ（日本金属学会）, 41(2002), 101.